Products List
Contact Us
Henan ZB Environmental Sci-tech Co.,LTD.
TEL:+86-0371-88810169
MP:+86-13838587319
Skype:zhongbiao6@outlook.com
Address:Industrial Economic Development Zone, Gongyi City, Henan Province, China

Gold grinding machine

gold grinding machine-ZBgold grinding machine-ZB manufacturer

I.Introduction

 The gold grinding machine used with gold, silver, lead, zinc, iron, molybdenum, copper, antimony mine, mine, all ball mill can be selected grind gold machine can be used. Characteristics: grind gold through the raw material mixing, rolling, crushing, rolling repeatedly reach moisture equilibrium ratio of uniform, low gas content, improve the forming rate and forming quality, grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utilized

The gold grinding machine is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron ore, molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore.

  Spare parts-gold grinding machine of ZBGold grinding machine Spare parts-ZB

II.Working Principle

1).The motor will transmit the motive power to reduction gears, under the drive of reduction gears that passing through large vertical spindle, then the power cabient transfers to above whippletree.

2).The whipple tree pulls the two roller wheels clockwise rotation,runner wheels are not only revoluting around the large vertical spindle but also could retating by themselves.

3).After adding into ore,the materials are under the extrusion of grinding roller weight to revoluting and rotating with roller wheels, when twisting that coming into being huge friction force with grinding base,after suffering repeated extrusion,rub,grinding that be crushed thoroughly.

4).Under the affection of grinding roller operating, the crushed materials and the water mixed intensively to float on it uniformly,then passing through the overflow discharge gate that setting up on the mill basin to discharge,after that enter into next operation procedure to process.

5).Coarse mineral was sank on the bottom of grinding base, keep grinding and crushing,till the fineness could reach to standard floating on it..

 

III. Technical Parameter

 

Model 

Speed r/min

Power (kw)

Process ability( t/h)

 Weight(T)

850

13-18

4.5

0.4

3

900

13-18

5.5

0.6

3.6

1000

13-18

5.5

0.8

4.2

1100

13-18

7.5

1

4.6

1200

16-18

7.5

2

5.8

1300

16-18

11

3

8

1350

16-18

13

4

8.5

1400

16-18

15

5

9.5

1500

20-22

22

8

10.5

1600

20-22

30

10

16